The wrong MobileGestalt was applied. Stop before you try to undo it.

Stop clicking Apply or Reset, close the write workflow and disconnect every non-target iPhone or iPad. Preserve the selected file, both devices’ true identities, the first log and each current screen. Then classify each affected device separately; do not use one phone to repair the other.

One reporter says an iPhone SE 2 was used first, then disconnected, and Apply was clicked while an iPhone 13 was connected. The reporter attributes the SE 2 Gestalt to the iPhone 13 and reports bootloop/Recovery Menu afterward. The open issue contains no maintainer response or published final outcome.

No. It proves that one wrong-target incident was publicly reported. It provides no denominator, controlled reproduction, affected-version matrix or probability. A wrong file is still a hard stop because the potential consequence is severe.

No. File selection, an Apply click, a completed restore message, reload and the observed device state are separate pieces of evidence. Keep the first exact log and screen instead of converting “I clicked it” into a completed-write claim.

Selection alone is not evidence of a device write. Close the product without applying, disconnect extras, preserve the files and rebuild the device/file match from the beginning. Verify the phone remains normal before another session.

It means the final write and reload state is unproven. Preserve the log and current phone state; do not click again to find out. If the phone is normal, reconstruct the incident for project support. If its boot, setup or services changed, use the recovery route.

A stable usable phone remains above the Apple erase boundary. Reconstruct the exact target, release/build, current backup and verified pre-change original first. A single product-level baseline attempt may be available through the routine reset route, but the public owner issue does not establish a universal corrected-file procedure; do not run it blindly.

Not immediately. First prove which device received which file, whether a write completed and whether the affected phone is fully usable. During bootloop, Recovery, Setup or activation trouble, every MisakaX write stops. On a stable device, use only the documented routine revert after the identity chain is verified.

No. Reconnecting another device does not undo a write on the affected phone and can create a second target error. Close the workflow, keep one affected target at a time and route that target by its own state.

Issue #112 says the first iPhone had been used without problems before it was unplugged; it does not report a later change on that phone. Disconnecting is not evidence that another write reached it. Keep it out of the workflow, verify its boot, identity and core services separately, and do not apply anything merely to “make sure.”

The report places the unplug, a second connected iPhone and an accidental Apply in that order, but it does not isolate unplugging as the cause. There is no controlled reproduction or maintainer diagnosis. Record the full target/file/Apply chain instead of assigning the outcome to one step.

Treat them as two incidents. Disconnect both, then record each phone’s current screen, true model and build, Apple-computer detection, original-file status and last proven write separately. Never share a plist, revert attempt or recovery decision between them; route each device by its own observable state.

No. ProductType identifies a hardware model class, not one physical phone. The exact-device file and its preserved context remain separate even when model, color, capacity and installed build appear the same.

No. The expected filename helps the product recognize the file type, but it does not prove physical-device ownership. Use the pre-change folder record, file digest comparison and exact-device identity evidence; never rename a borrowed file into legitimacy.

Use the record created before Apply: physical target label, collection date, ProductType, ProductVersion, BuildVersion, FirmwareVersion and matching original/recovery-copy digest. If that chain was never created or now conflicts, mark ownership uncertain and stop.

No. ProductType such as iPhone14,5 describes a product class. It is useful in a four-field compatibility check, but it is not a unique physical-device identifier.

The MobileGestalt guide has a local read-only inspector for filename, format, SHA-256 and four readable XML fields. It uploads nothing, but even matching fields or digests do not prove that a file belongs to the connected physical device.

No. Do not publish the plist, its full digest, serial, UDID, IMEI or account data. Send a redacted environment and stage record. If unique identifiers are required by Apple support, provide them only through the appropriate private support channel.

Do not download one or borrow from the same model. Preserve the current files and state and ask project support for a release-specific boundary. If the phone is already in boot/recovery/activation trouble, the absence of an original does not change the Apple state-first route.

No. Editing the fields used to detect a mismatch destroys the evidence and can add another false identity. A failed match is a stop condition, not a repair instruction.

Stop all MisakaX and misaka26 writes. Record the logo pattern, whether a progress bar moves and whether Finder or Apple Devices sees a normal or Recovery device. Use the parent recovery guide to choose restart, Recovery Mode Update, destructive Restore or service from the current state.

Keep it connected through the current Apple workflow and do not return to MisakaX. Apple says to restart while connected and, if the screen remains, choose Update—not Restore—first. Restore erases data.

Apple documents Update as reinstalling iOS or iPadOS while keeping personal data; it does not publish a MisakaX-specific MobileGestalt field guarantee. Treat successful boot and verified identity/core services as separate after-state evidence.

Apple Restore erases the device and installs current compatible software, so it is a broader destructive recovery route. Do not use it as a routine first response or promise a particular cache outcome. Confirm backup and activation access, then verify the baseline after setup.

No owner-published matrix establishes whether every modified MobileGestalt field is included, excluded or regenerated across each backup type and system build. The answer is unknown. Restore only a trusted backup and verify identity, settings, core services and boot afterward.

A restart or successful Recovery Mode Update might return access without restoring a backup, but no such outcome is guaranteed. Apple Restore erases local data. If data is irreplaceable, stop before approving Restore and discuss the boundary with Apple or qualified service.

Not as the default next action. The current Apple consumer ladder is restart, Recovery Mode Update, destructive Restore and service. This page does not validate DFU, manual IPSW, downgrade or no-loss “unbrick” claims.

Treat that as an identity/activation incident. Do not counter-spoof, migrate or click through blindly. Preserve the exact screen and ownership credentials, then use the parent recovery guide. Erase does not bypass Activation Lock.

No. Find My is an account/security state involved in some documented workflows; it does not correct file-to-device identity. Do not toggle account controls as an experiment, and restore normal protection only through the appropriate completed route.

Stop and contact the owner or administrator. A wrong-file incident does not grant permission to remove management, erase or re-enroll the device. Activation and organization access may be required after recovery.

Treat the phone as degraded even if it reaches the Home Screen. Stop feature testing, record the first affected service and reconstruct the complete change set. Use one verified routine revert boundary, then escalate if baseline health does not return.

No. Force restart only restarts an unresponsive device. It can help classify the new state, but it does not prove a product revert or exact identity restoration.

Send the product track/release, true models, ProductVersion and BuildVersion, computer OS, connection order, selected-file role, Apply/log stage, reload result, current state, original-file status, backup status and Apple detection. Redact all unique identifiers and plist content.

The public record does not give the release/build/computer environment, exact log, file inspection, backup state, Apple recovery actions, data outcome or final device state. It also has no maintainer diagnosis. This page keeps those gaps visible.

Quit before any cable swap, keep one target connected, label physical devices, separate file folders, re-read target and file identity after every reconnect, use one working copy and keep the verified original untouched. Never press Apply after the selected target disconnects.

No. Names can be duplicated or changed. Use a physical label plus the computer-visible device and the saved file context. Unique identifiers may help private support, but they should not appear in public screenshots or reports.

No. It only classifies the answers selected in this browser tab. It has no USB, file, plist, backup or account access and cannot prove a write, validate ownership or repair a device.